HOME > News > Industry News > Ministry of Industry announced the 2017 "automotive power battery stand

Ministry of Industry announced the 2017 "automotive power battery stand

2016-12-28

Automotive power battery industry specification conditions (2017)
(Draft)
I. General Provisions
(1) For the implementation of the "State Council on the issuance of energy-saving and new energy automotive industry development plan (2012-2020) notice" (Guo Fa 〔2012〕 22), according to the "General Office of the State Council on accelerating the use of new energy vehicles Guidance "(State Council issued 〔2014〕 35) requirements, guide and regulate the healthy development of automotive power battery industry, the development of the conditions of this specification.
(2) The State supports the development of automobile power battery enterprises to do better and stronger, and to guide enterprises to establish product production standards and quality assurance systems based on enterprise production and product application safety, encourage the strengthening of technology and management innovation, improve product development and manufacturing level Product performance and quality, to meet the new energy automotive industry development needs.
(C) the state to meet the conditions of this standard car power battery enterprises to implement the announcement management, enterprises in accordance with the principle of voluntary application.
(4) The conditions of this specification apply to power battery production enterprises that are produced in the territory of the People's Republic of China (except Taiwan, Hong Kong and Macao) and are supporting the automobile products.
The power battery referred to in this specification refers to a device that is used in an automobile to provide energy and can be recharged to provide energy for driving the vehicle, including lithium ion power batteries, metal hydride nickel batteries and supercapacitors, etc. , Does not include lead-acid batteries.
This specification conditions refers to the power battery production enterprises, including power battery monomer production enterprises (hereinafter referred to as single enterprises) and power battery system manufacturing enterprises (hereinafter referred to as system enterprises).
Second, the basic requirements of enterprises
(5) It is established according to the laws and regulations of the State and conforms to the requirements of the automobile industry development policy and has the independent legal personality and obtains the business license issued by the administrative department for industry and commerce.
(6) It is in line with the requirements of laws, regulations and other regulations on safety production, environmental protection, energy conservation and fire fighting. It has established safety production, environmental protection plan mechanism and energy conservation management system. Through environmental management, occupational health, safe production and so on Assessment or certification, and has a sound fire safety monitoring and disposal system.
(7) The legal land use right, the production land area and the factory building of the production site shall be compatible with the product variety and scale of the products produced by the enterprise.
(8) lithium-ion battery single-enterprise annual production capacity of not less than 80 billion watts, metal hydride nickel battery single enterprise annual production capacity of not less than 100 million watts, super capacitor single enterprise annual production capacity is not Less than 10 million watts. System enterprises with an annual output capacity of not less than 80,000 sets or 4 billion watts. Production of various types of power battery single enterprise, system enterprises, the annual production capacity to meet the above requirements.
(9) The enterprise shall formulate and implement the enterprise standards which are not lower than the national or industry standards in terms of the safety, consistency and cycle life of the power battery products.
(10) enterprises within the past two years there is no production and operation and product application of major security incidents.
Third, the production conditions
(11) Enterprises shall have production facilities, facilities and their ownership in accordance with the variety and scale of the products produced.
Monomer enterprises should have the electrode preparation, battery assembly, chemical and other processes of production equipment and facilities, as well as the production workshop temperature, humidity, cleanliness and other real-time monitoring of the production environment monitoring system and the corresponding equipment and facilities.
System enterprises should have suitable for mass production of power battery system assembly line.
(12) The monomer enterprise shall have at least the automated production capacity and on-line detection capability of the key process such as electrode preparation, laminating / winding, assembling, filling, chemical /
System enterprises should have at least the battery or module detection, welding or connection, assembly, off-line detection and other key processes of automated production and on-line detection capabilities.
(13) enterprises should have a standardized process, and the establishment of raw materials, semi-finished products, the production process parameters, products, such as complete factory monitoring system, with precision control of products such as product consistency guarantee capability.
(14) The enterprises shall monitor and discharge the waste water and waste gas produced in the production process, and supervise and manage the disposal and recycling of waste materials. All kinds of emissions should be consistent with GB30484 "battery industry pollutant discharge standards" and other countries, industry standards and related laws and regulations.
Fourth, technical capacity requirements
(15) Enterprises shall establish product design and development institutions with the corresponding research and development personnel, which shall not be less than 10% of the total number of employees or not less than 100. Research and development personnel should cover at least the new product technology research and development, material analysis and evaluation, the development of new technology tooling, product trial and test analysis, enterprise standard revision, patent tracking and application.
(16) Enterprises should establish a product design and development process and technology management system compatible with automobile research and development, establish a design specification for automobile power battery products, establish a database of product development information, and should have the following research and development capabilities:
The monomer enterprise should have the capability of designing and developing the production technology and product (including the material product) test and verification of the single power battery, and have the verification and analysis ability of the key performance such as the safety and consistency of the single power battery.
The system enterprise should have the capability of designing and developing the test and development of the thermal battery management system, such as the structure, the auxiliary device, the structure of the load-bearing device, the management system and the thermal management system, and has the safety, consistency and reliability of the system and key components. Key functions and performance verification and analysis capabilities.
(17) enterprises should be equipped with at least the above materials analysis, research and development trial, safety evaluation, performance evaluation and other related development tools, software, research and development and testing and verification equipment, trial equipment (including pilot line) and so on.
(18) enterprises should have a complete product research and development experience, and has a product research and development continue to invest in security capabilities.
Fifth, product requirements
(19) Power battery products should meet the existing national standards, industry standards (see Annex 1), and by a qualified vehicle power battery testing institutions related to testing qualified.
(20) R & D and production of products should comply with the provisions of the legal protection of intellectual property rights.
Six, quality assurance ability requirements
(21) Enterprises shall adopt the TS16949 quality system certification to prepare and implement the production consistency control plan.
(22) enterprises should establish from the raw materials storage, semi-finished products to the finished product factory complete inspection system and traceability system, and the implementation of computer information production management.
Seven, after-sales service capacity requirements
(23) enterprises should establish a sound after-sales service system, and product quality service after-sales service capacity. Should have the ability to quickly analyze the power battery failure, as well as power battery use, failure and the main problem summary analysis of the ability.
(24) enterprises should meet the national and local power battery products on the recycling of relevant policies and regulations.
Eight, standardized management
(25) Application, examination and announcement of business standard conditions:
1. The Ministry of Industry and Information Technology is responsible for the management of automotive power batteries. The application enterprise shall prepare the Report on the Application Conditions for the Specification of Automotive Power Battery Industry (see Annex 2), and provide relevant materials according to the requirements, and apply to the Ministry of Industry and Information Technology through the competent department of industry and information technology of the province, autonomous region or municipality directly under the Central Government. Enterprises belonging to the enterprise through the enterprise headquarters to the Ministry of Industry and Information Technology application, and copy the enterprise located in the province, autonomous region, municipalities, industry and information technology department.
2. Enterprises through the Ministry of Industry and Information Technology "automobile power battery production enterprise management system" to the provinces, autonomous regions and municipalities in charge of industry and information technology departments, the central enterprises to declare online.
3. The provinces, autonomous regions and municipalities directly under the Central Government and information technology departments, the central enterprises responsible for the power battery production enterprises to apply for materials to meet the requirements of the first instance.
4. The provinces, autonomous regions and municipalities directly under the Central Government and information technology departments, the central enterprises will be the first trial of qualified business materials through the "automotive power battery production enterprise management system" reported to the Ministry of Industry and Information Technology. At the same time, a copy of the official paper document (including the annex material) is sent to the Ministry of Industry and Information Technology (Equipment Industry Division). The submission department shall ensure that the application documents are complete and true.
5. The Ministry of Industry and Information Technology organizes expert groups to review the application.
6. Ministry of Industry and Information Technology of the enterprises through the review of publicity, no objection to be announced.
(Including legal representative, product type, product shape, enterprise name, production address, registered address change or new site expansion, etc.), the need to pass the provinces, autonomous regions, autonomous regions and municipalities, autonomous regions and municipalities, Autonomous regions and municipalities directly under the Central Government, the central enterprises shall submit the application for alteration to the Ministry of Industry and Information Technology, and the central enterprises shall apply the materials at the same time to copy the industrial and informatization departments of the provinces, autonomous regions and municipalities directly under the Central Government. The application must include the following part or all of the application materials:
1. Changes in relevant conditions of the enterprise;
2. the relevant agreement on capital change and the articles of association of the company;
3. Workers' congress, board of directors or general meeting of shareholders;
4. Photocopy of business license before and after business change;
5. Report on self-assessment of business control criteria;
6. Other relevant information and supporting materials.
The Ministry of Industry and Information Technology will organize expert groups to review. After the change to meet the requirements of the standard conditions, no objection after the announcement of the enterprise, the announcement to change its relevant information.
(XXVIII) Ministry of Industry and Information Technology on the list of enterprises to dynamically manage the list. Announcement The enterprise shall submit its annual development report online (March 3) and submit 1 copy of the paper material to the Ministry of Industry and Information Technology (Equipment Industry Division) before March 30th of each year. Ministry of Industry and Information Technology will establish the annual development of enterprises publicity system.
(28) provinces, autonomous regions and municipalities directly under the Central Administration of Industry and information technology departments, the central enterprises each year to the region or its enterprises to implement the conditions of supervision and inspection of the situation, found that fraud, the situation has undergone major changes, there are security risks or security Accident, should be promptly reported to the Ministry of Industry and Information Technology. Ministry of Industry and Information Technology on the announcement of the enterprises within the spot checks, while welcoming the community on the announcement of the enterprise norms to monitor the situation. Announcement The Company will suspend or revoke its eligibility if:
1. The information is fraudulent;
2. refuse to accept the supervision and inspection;
3. not submit the annual development report as required;
4. can not maintain the normative conditions;
5. Violation of national laws, regulations and industrial policies;
6. Enterprise production or product application of security incidents, resulting in adverse social impact.
Suspension of the declaration of qualified enterprises, should be rectified within a time limit, rectification and verification is still not meet again, will be removed from the directory. To deceive, bribery and other improper means to be included in the notice, are directly related to security matters, revoked within 3 years after the suspension of acceptance of the application.
Nine, Supplementary Provisions
(XXIX) Power battery manufacturers that are not included in the existing product classification type shall be implemented in accordance with the conditions of this standard.
(30) The conditions of this specification by the Ministry of Industry and Information Technology is responsible for the interpretation, and in accordance with the development of the industry timely revision.
(31) The conditions of this specification since the implementation of the date of December 1, 2017.
Annex: 1. Standard for inspection of automotive power battery products
2. Automotive power battery industry standard conditions for application report
3. Annual Report on Enterprise Development
Previous:第一页
Next:最后一页